Isitaki esiNcinci esipholileyo esithe nkqo kwibar yamandla ephezulu epakishwe ngelaser diode
Ulwazi ngeMveliso:
1. Ngokweemfuno zabathengi, i-indium solder okanye iteknoloji yokupakisha i-tin solder ingasetyenziswa.Imveliso ineenzuzo zokuthembeka okuphezulu, ubomi obude, ukusebenza kakuhle kokuguqulwa kwe-photoelectric, ukuzinza okuphezulu, umgangatho ophezulu we-beam, ukumomotheka okuphantsi kunye nobubanzi bomgca omncinci.
2. Imveliso ineempawu zokugubungela ububanzi be-wavelength kunye noluhlu lwamandla, ubude be-wavelength ukusuka kwi-630nm ukuya kwi-1940nm, ukugubungela amandla ukusuka kwinqanaba le-watt ukuya kwi-250W eqhubekayo, i-quasi-continuous 500W.
3. Iifom ezahlukeneyo zokupakisha imveliso zinokuhlangabezana neemfuno zabathengi abahlukeneyo, njenge-bar-single, i-vertical stacked array, i-horizontal stacked array, i-dimensional area array kunye ne-bar fiber-coupled products, njl.
4. Abathengi banokukhetha ngokukhawuleza kunye nokucotha kwe-axis collimation, i-VBG lock wavelength, i-BTS yokuguqulwa kwe-beam, ukudibanisa kwe-beam, i-homogenization yendawo, i-design yentloko ye-laser jikelele, njl.
Iimpawu eziphambili
Uncumo oluphantsi
Ixesha elide lobomi
Usetyenziso
Impompo yeFayibha laser
Utyando
Uphando lwezeNzululwazi
Imiyalelo yokusetyenziswa
I-Laser diode kufuneka isetyenziswe ngokweenkcukacha.
I-Laser diode kufuneka isebenze ngokupholisa okulungileyo.
Ubushushu bokusebenza buqala kwi-20℃ ukuya kwi-30℃.
Ubushushu bogcino buphakathi kwe-0℃ ukuya +55℃.
IIPARAMETHA ZEMVELISO
| Iinkcukacha (25°C) | Iyunithi | E2Y-808.3-600C- 1×6 | E2Y-808.3-3000Q-1×6 | E2Y-940.3-3000Q-1×6 | |
| Idatha ye-Optical (1) | Imo yokusebenza | - | cw | QCW | QCW |
| Ubude beWaveleng esembindini | nm | 808±3 | 808±3 | 940 ±3 | |
| Imveliso yamandla ngeBar nganye | W/bar | 100 | 500 | 500 | |
| Bar Numbers | iipcs | 1-6 | 1-6 | 1-6 | |
| Ububanzi (FWHM) | nm | <5 | <5 | <5 | |
| Idatha yoMbane | Ukwahlukana ngokukhawuleza kwe-Axis (amandla angama-95%) | deg | 60-70 ° | 60-70 ° | 60-70 ° |
| Ukwahlukana ngokukhawuleza kwe-Axis nge-FAC (amandla angama-90%) | mrad | ≤8mrad | ≤8mrad | ≤8mrad | |
| I-Slow Axis Divergence (95% amandla) | deg | 8-12 ° | 8-12 ° | 8-12 ° | |
| I-Threshold yangoku | A | ≤20 | ≤40 | ≤40 | |
| Ukusebenza ngoku | A | ≤110 | ≤480 | ≤480 | |
| I-Voltage yokusebenza | V/bar | ≤2 | ≤2 | ≤2 | |
| Ukuphindaphinda | HZ | / | 200-1000 | 200-1000 | |
| Isekile yomsebenzi | % | / | ≤10% | ≤10% | |
| Ukuthambeka | W/A | ≥6.6 | ≥6.6 | ≥6.6 | |
| Ukusebenza kakuhle | % | ≥50 | ≥50 | ≥50 | |
| Abanye | Ubushushu baManzi okupholisa(2) | °C | 25 | 25 | 25 |
| Ubushushu bokuGcina (3) | °C | 0-55 | 0-55 | 0-55 | |
| Uxinzelelo | ibha | <5 | <5 | <5 | |
| Umgangatho wohambo | L/min/bar | <0.33 | <0.33 | <0.33 | |
| Ukucaciswa kwamanzi okupholisa | Amanzi adityanisiweyo 2.5±0.5|iS/cm,pH-ixabiso 5.5-8, isihluzo^5pm | ||||
(1) Idatha elinganiswe phantsi kokusebenza kumandla aphumayo aqhelekileyo @25°C.
(2) Ubushushu bokusebenza obuchazwe ngumphathi wepakethe.Uluhlu lokusebenza olwamkelekileyo yi-20 ° C ~ 30 ° C, kodwa ukusebenza kunokwahluka.
(3) Idatha engentla ibhekiselele kuphela.Ngedatha ethile, nceda ubhekisele kwidatha yephakheji yokuhanjiswa.
